Page 177 - Course_Catalog_2020-2021

All courses are for unit credit and apply to a De Anza associate degree unless otherwise noted.
D DMT 95 Manufacturing Materials and Processes
(Formerly MCNC 64.)
Advisory: EWRT 200 and READ 200, or ESL 261, 262 and 263.
Three hours lecture, three hours laboratory (72 hours total per quarter).
Applied materials and process analysis. Materials and process selection techniques. The role of metals, polymers, ceramics and composites in the casting, molding, forging, forming, machining, joining, heat and surface treatment processes.
DMT 108 CAD Technology Laboratory 2 Units SolidWorks (Surfaces)
(Formerly CDI 108Z.)
Requisite/Advisory: None.
Six hours laboratory (72 hours total per quarter).
Pass-No Pass (P-NP) course.
Self-paced projects and computer based training on SolidWorks software. Instruction is in the use of CAD technology using projects from other SolidWorks courses. Learning assistance is provided in a designated De Anza center by an approved De Anza instructor who is trained in SolidWorks software.
DMT 109 CAD Technology Laboratory Creo 2 Units Parametric (Sheetmetal)
(Formerly CDI 109Z.)
Requisite/Advisory: None.
Six hours laboratory (72 hours total per quarter).
Pass-No Pass (P-NP) course.
Self-paced projects and computer based training on Creo software. Instruction is in the use of CAD technology using projects from other Creo courses. Learning assistance is provided in a designated De Anza center by an approved De Anza instructor who is trained in Creo software.
DMT 110 CAD Technology Laboratory Geometric 2 Units Dimensioning and Tolerancing
(Formerly CDI 110Z.)
Requisite/Advisory: None.
Six hours laboratory (72 hours total per quarter).
Pass-No Pass (P-NP) course.
Self-paced projects and computer based training on CAD software. Instruction is in the use of CAD technology to create models and drawings complying with ANSI Y14.5 Geometric Dimensioning and Tolerancing. Learning assistance is provided in a designated De Anza center by an approved De Anza instructor who is trained in CAD software.
DMT 201 Manufacturing and CNC Technology 2 Units Laboratory/Conventional Machining 1
(Formerly MCNC 201.)
Credit course - Does not apply to De Anza associate degree.
Corequisite: DMT 80.
Six hours laboratory (72 hours total per quarter).
Pass-No Pass (P-NP) course.
Use of Design and Manufacturing Technology labs for additional/advanced projects in DMT 80, Introduction to Machining and CNC Processes. Projects will vary based on the students skill level and the direction of the instructor.
DMT 202 Manufacturing and CNC Technology 2 Units Laboratory/CNC Machining 1
(Formerly MCNC 202.)
Credit course - Does not apply to De Anza associate degree.
Corequisite: DMT 84A.
Six hours laboratory (72 hours total per quarter).
Pass-No Pass (P-NP) course.
Use of Design and Manufacturing Technology labs for additional/advanced projects in DMT 84A, Introduction to Computer-Aided Numerical Control (CNC) Programming and Operation; Mills. Projects will vary based on the students skill level and the direction of the instructor.
DMT 101 CAD Technology Laboratory Creo Parametric (Beginning)
2 Units
(Formerly CDI 101Z.)
Requisite/Advisory: None.
Six hours laboratory (72 hours total per quarter).
Pass-No Pass (P-NP) course.
Self-paced introductory projects and computer based training on Creo software. Instruction is in the use of CAD technology using projects from other Creo courses. Learning assistance is provided in a designated De Anza center by an approved De Anza instructor who is trained in Creo software.
DMT 102 CAD Technology Laboratory SolidWorks (Beginning)
2 Units
(Formerly CDI 102Z.)
Requisite/Advisory: None.
Six hours laboratory (72 hours total per quarter).
Pass-No Pass (P-NP) course.
Self-paced introductory projects and computer based training on SolidWorks software. Instruction is in the use of CAD technology using projects from other SolidWorks courses. Learning assistance is provided in a designated De Anza center by an approved De Anza instructor who is trained in SolidWorks software.
DMT 103 CAD Technology Laboratory Creo Parametric (Intermediate)
2 Units
(Formerly CDI 103Z.)
Requisite/Advisory: None.
Six hours laboratory (72 hours total per quarter).
Pass-No Pass (P-NP) course.
Self-paced intermediate projects and computer based training on Creo software. Instruction is in the use of CAD technology using projects from other Creo courses. Learning assistance is provided in a designated De Anza center by an approved De Anza instructor who is trained in Creo software.
DMT 104 CAD Technology Laboratory SolidWorks (Intermediate)
2 Units
(Formerly CDI 104Z.)
Requisite/Advisory: None.
Six hours laboratory (72 hours total per quarter).
Pass-No Pass (P-NP) course.
Self-paced intermediate projects and computer based training on SolidWorks software. Instruction is in the use of CAD technology using projects from other SolidWorks courses. Learning assistance is provided in a designated De Anza center by an approved De Anza instructor who is trained in SolidWorks software.
DMT 105 CAD Technology Laboratory Creo Parametric (Advanced)
(Formerly CDI 105Z.)
Requisite/Advisory: None.
Six hours laboratory (72 hours total per quarter).
Pass-No Pass (P-NP) course.
Self-paced advanced projects and computer based training on Creo software. Instruction is in the use of CAD technology using advanced extended projects based on other Creo courses. Learning assistance is provided in a designated De Anza center by an approved De Anza instructor who is trained in Creo software.
DMT 106 CAD Technology Laboratory 2 Units SolidWorks (Advanced)
(Formerly CDI 106Z.)
Requisite/Advisory: None.
Six hours laboratory (72 hours total per quarter).
Pass-No Pass (P-NP) course.
Self-paced advanced projects and computer based training on SolidWorks software. Instruction is in the use of CAD technology using projects from other SolidWorks courses. Learning assistance is provided in a designated De Anza center by an approved De Anza instructor who is trained in SolidWorks software.
DMT 107 CAD Technology Laboratory Creo 2 Units Parametric (Surfaces)
(Formerly CDI 107Z.)
Requisite/Advisory: None.
Six hours laboratory (72 hours total per quarter).
Pass-No Pass (P-NP) course.
Self-paced projects and computer based training on Creo software. Instruction is in the use of CAD technology using projects from other Creo courses. Learning assistance is provided in a designated De Anza center by an approved De Anza instructor who is trained in Creo software.
176
2O20-2O21 DE ANZA COLLEGE CATALOG
4 Units
2 Units
DMT 203 Manufacturing and CNC Technology 2 Units
Laboratory/CNC Machining 2
(Formerly MCNC 203.)
Credit course - Does not apply to De Anza associate degree.
Corequisite: DMT 84B.
Six hours laboratory (72 hours total per quarter).
Pass-No Pass (P-NP) course.
Use of Design and Manufacturing Technology labs for additional/advanced projects in DMT 84B, Computer-Aided Numerical Control (CNC) Programming and Operation; Lathe Introduction, Advanced Mills. Projects will vary based on the students skill level and the direction of the instructor.
DMT 204 Manufacturing and CNC Technology 2 Units Laboratory/CNC Machining 3
(Formerly MCNC 204.)
Credit course - Does not apply to De Anza associate degree.
Corequisite: DMT 84C.
Six hours laboratory (72 hours total per quarter).
Pass-No Pass (P-NP) course.
Use of Design and Manufacturing Technology labs for additional/advanced projects in DMT 84C, Computer-Aided Numerical Control (CNC) Lathes and Horizontal Machining Centers; Programming and Operation, 4th Axis Rotary, Fixture Design. Projects will vary based on the students skill level and the direction of the instructor.