Fall 2026 Class Listing
Design and Manufacturing Technologies Department Visit Department Website

Results Filters

CRN Course Sec Seats Title Days Times Instructor Loc Class Info
26633 DMT 53 01 Open Introduction to 3D Printing/Additive Manufacturing
DMT-053.-01: Fully ON-CAMPUS. This class meets on-campus each week on scheduled days and times as noted in the class listing. See www.deanza.edu/dmt call 408 864-5578 or email cad@deanza.edu for more information.
 ·T·R··· 06:00 PM-07:50 PM Kara Krone E36
28685 DMT 53 02 Open Introduction to 3D Printing/Additive Manufacturing
DMT-053: Fully ON-CAMPUS. This class meets on-campus each week on scheduled days and times as noted in the class listing. See www.deanza.edu/dmt call 408 864-5578 or email cad@deanza.edu for more info.
 M·W···· 01:00 PM-02:50 PM Kara Krone E36
27127 DMT 55 01 Open Survey of Design and Manufacturing Processes/Modern Fabrication
DMT-053.01: Fully ON-CAMPUS. This class meets on-campus each week on scheduled days and times as noted in the class listing. See www.deanza.edu/dmt call 408.864.8283 or email appiomike@deanza.edu or cad@deanza.edu for more info.
 ·T·R··· 02:30 PM-04:20 PM Kara Krone E36
27843 DMT 55 01G Open Survey of Design and Manufacturing Processes/Modern Fabrication
DMT-055.01G: ON-CAMPUS. This class meets each week on scheduled days and times as noted in the class listing. Restricted to FUHSD students. This is a dual enrollment class offered through the CCAP agreement between Fremont Union High School District and De Anza College. Any questions, please contact rodrigueztrantiffany@fhda.edu.
 ·T·R··· 02:30 PM-04:20 PM Kara Krone E36
26626 DMT 60A 01 Open SolidWorks (Introduction)
DMT-060A-01: Fully ON-CAMPUS. This class meets on-campus each week on scheduled days and times as noted in the class listing. See www.deanza.edu/dmt call 408 864-5578 or email cad@deanza.edu for more info.
 ·T·R··· 08:30 AM-09:20 AM Paul Klingman E34
LAB ·T·R··· 09:30 AM-12:20 PM
22781 DMT 60A 62Z Open SolidWorks (Introduction)
DMT-060A-62Z: Online Course. Students must have access to a computer with appropriate release of SolidWorks software that will be made available for download free of charge to enrolled students, the Web and an individual email address. Exclusively using a tablet or phone may prevent you from successfully completing a course. Consider taking a DMT-100 CAD Lab class for access to the lab. Information about Canvas and Online Education Orientation can be found in Canvas on the Student Resources page: https://deanza.instructure.com/courses/3382
······· TBA-TBA Paul Klingman ONLINE OL
LAB ······· TBA-TBA
28076 DMT 61A 01 Open SolidWorks (Intermediate)
DMT-061A-01: Fully ON-CAMPUS. This class meets on-campus each week on scheduled days and times as noted in the class listing. See www.deanza.edu/dmt call 408 864-5578 or email cad@deanza.edu for more info.
 M·W···· 08:30 AM-09:20 AM Paul Klingman E34
LAB M·W···· 09:30 AM-12:20 PM
26679 DMT 61A 62Z Open SolidWorks (Intermediate)
DMT-061A-62Z: Online Course. Students must have access to a computer with appropriate release of SolidWorks software that will be made available for download free of charge to enrolled students, the Web and an individual email address. Consider taking a DMT-100 CAD Lab class for access to the lab. Information on REQUIRED online orientation available at http://www.deanza.edu/distance/
······· TBA-TBA Paul Klingman ONLINE OL
LAB ······· TBA-TBA
28077 DMT 62A 01 Open SolidWorks: Top-Down Design and Advanced System Tools
DMT-062A-01: Fully ON-CAMPUS. This class meets on-campus each week on scheduled days and times as noted in the class listing. See www.deanza.edu/dmt call 408 864-5578 or email cad@deanza.edu for more info.
 M·W···· 08:30 AM-09:20 AM Paul Klingman E34
LAB M·W···· 09:30 AM-12:20 PM
26630 DMT 62A 62Z Open SolidWorks: Top-Down Design and Advanced System Tools
DMT-062A-62Z: Online Course. Students must have access to a Windows computer with an appropriate release of SolidWorks software that will be made available for download free of charge to enrolled students, the Web and an individual email address. Exclusively using a tablet or phone may prevent you from successfully completing a course. Consider taking a DMT-100 CAD Lab class for access to the lab. Information about Canvas and Online Education Orientation can be found in Canvas on the Student Resources page: https://deanza.instructure.com/courses/3382
 ······· TBA-TBA Paul Klingman ONLINE OL
LAB ······· TBA-TBA
28073 DMT 65B 61Z Open Creo Parametric (Introduction)
DMT-065B-61Z: This is an online class with SOME Synchronous scheduled meetings as noted in the class listing. The rest of the class can be completed independently each week on the student's own time. Students must have access to a computer, the internet and an individual email address. Software will be provided for FREE to enrolled students. Consider taking a DMT-100 CAD Lab class for access to the lab & assistance with projects. A Windows OS laptop or desktop computer is required to successfully complete the course; a tablet or phone will not be adequate for all assignments and tests. See www.deanza.edu/dmt call 408 864-5578 or email cad@deanza.edu for more info. Canvas and Online Education Orientation can be found in Canvas on the Student Resources page: https://deanza.instructure.com/courses/3382. The Student Online Resources hub with extensive information and tips can be found at deanza.edu/online-ed/students/remotelearning.
 ······· TBA-TBA Roberto Sanchez ONLINE OL
LAB ······· TBA-TBA
28075 DMT 68B 61Z Open Creo Parametric Surface Modeling
DMT-068B-61Z: This is an online class with SOME Synchronous scheduled meetings as noted in the class listing. The rest of the class can be completed independently each week on the student's own time. Students must have access to a computer, the internet and an individual email address. Software will be provided for FREE to enrolled students. Consider taking a DMT-100 CAD Lab class for access to the lab & assistance with projects. A Windows OS laptop or desktop computer is required to successfully complete the course; a tablet or phone will not be adequate for all assignments and tests. See www.deanza.edu/dmt call 408 864-5578 or email cad@deanza.edu for more info. Canvas and Online Education Orientation can be found in Canvas on the Student Resources page: https://deanza.instructure.com/courses/3382. The Student Online Resources hub with extensive information and tips can be found at deanza.edu/online-ed/students/remotelearning.
 ······· TBA-TBA Roberto Sanchez ONLINE OL
LAB ······· TBA-TBA
28090 DMT 73B 01 Open Introduction to Computer Aided Design Using Autodesk Inventor
DMT-073B-01: Fully ON-CAMPUS. This class meets on-campus each week on scheduled days and times as noted in the class listing. See www.deanza.edu/dmt call 408 864-5578 or email cad@deanza.edu for more info.
 M·W···· 06:00 PM-06:50 PM Robert Benzio E34
LAB M·W···· 07:00 PM-09:50 PM
28091 DMT 73B 61Z Open Introduction to Computer Aided Design Using Autodesk Inventor
DMT-073B-62Z: Online Course. Students must have access to a computer with appropriate release of Autodesk Inventor Pro software that will be made available for download free of charge to enrolled students, the Web and an individual email address. Exclusively using a tablet or phone may prevent you from successfully completing a course. Consider taking a DMT-100 CAD Lab class for access to the lab. Information about Canvas and Online Education Orientation can be found in Canvas on the Student Resources page: https://deanza.instructure.com/courses/3382
 ······· TBA-TBA Robert Benzio ONLINE OL
LAB ······· TBA-TBA
23002 DMT 77A 65R Open Special Projects in Manufacturing and CNC/Mastercam Certification Level 1
DMT -77A-65R: Enrollment into this class is by instructor consent and is a selective process. To get on wait list and request an add code please email GillelandMax@DeAnza.edu and the instructor will contact you by e-mail one week before the quarter begins. If you want to add this Special Project section for Fall ’24 you must show up in E25 on Sept. 25th at 3 pm to fill out your paperwork with the instructor. See www.deanza.edu/dmt or call 408-864-8283 for more information.
 M·W···· 02:30 PM-05:20 PM STAFF, M E25 LC
23007 DMT 77B 65R WL Special Projects in Manufacturing and CNC/Mastercam Certification Level 2
DMT -77B-65R: Enrollment into this on campus face to face class is by instructor consent and is a selective process. To get on wait list and request an add code please email GillelandMax@DeAnza.edu and the instructor will contact you by e-mail one week before the quarter begins. If you want to add this Special Project section for Fall ’24 you must show up in E25 on Sept. 25th at 3 pm to fill out your paperwork with the instructor. See www.deanza.edu/dmt or call 408-864-8283 for more information.
 M·W···· 02:30 PM-05:20 PM Mike Appio E25 LC
23011 DMT 77D 65R Open Special Projects in Manufacturing and CNC/NIMS Level 1
DMT -77D-65R: Enrollment into this on campus face to face class is by instructor consent and is a selective process. To get on wait list and request an add code please email GillelandMax@DeAnza.edu and the instructor will contact you by e-mail one week before the quarter begins. If you want to add this Special Project section for Fall ’24 you must show up in E25 on Sept. 25th at 3 pm to fill out your paperwork with the instructor. See www.deanza.edu/dmt or call 408-864-8283 for more information.
 M·W···· 02:30 PM-05:20 PM STAFF, M E24 LC
23013 DMT 77F 65R Open Special Projects in Manufacturing and CNC/NIMS Level 3
DMT 77F-65R: Enrollment into this on campus face to face class is by instructor consent and is a selective process. To get on wait list and request an add code please email GillelandMax@DeAnza.edu and the instructor will contact you by e-mail one week before the quarter begins. If you want to add this Special Project section for Fall ’24 you must show up in E25 on Sept. 25th at 3 pm to fill out your paperwork with the instructor. See www.deanza.edu/dmt or call 408-864-8283 for more information.
M·W···· 02:30 PM-05:20 PM STAFF, M E24 LC
28322 DMT 77G 65R Open Special Projects in 3D Printing/Additive Manufacturing
DMT -77G-65R: Projects advancing student's knowledge and experience in a selected areas of 3D Printing. Enrollment into this class is by instructor consent and is a selective process. To get on wait list and request an add code please email GillelandMax@DeAnza.edu and the instructor will contact you by e-mail one week before the quarter begins. If you want to add this Special Project section for Fall ’24 you must show up in E25 on Sept. 25th at 3 pm to fill out your paperwork with the instructor. See www.deanza.edu/dmt call 408-864-8283 or email cad@deanza.edu for more information.
 M·W···· 02:30 PM-05:20 PM STAFF, M E24 LC
28323 DMT 77H 65R Open Special Projects for Additive Manufacturing in the Digital Factories
DMT -77H-65R: Projects advancing student's knowledge and experience in a selected areas of Additive Manufacturing. Enrollment into this class is by instructor consent and is a selective process. To get on wait list and request an add code please email GillelandMax@DeAnza.edu and the instructor will contact you by e-mail one week before the quarter begins. If you want to add this Special Project section for Fall ’24 you must show up in E25 on Sept. 25th at 3 pm to fill out your paperwork with the instructor. See www.deanza.edu/dmt call 408-864-8283 or email cad@deanza.edu for more information.
 M·W···· 02:30 PM-05:20 PM STAFF, M E24 LC
28324 DMT 77J 65R Open Special Projects in Additive Manufacturing for Rapid Prototyping
DMT -77J-65R: Projects advancing student's knowledge and experience in a selected areas of Additive Manufacturing. Enrollment into this class is by instructor consent and is a selective process. To get on wait list and request an add code please email GillelandMax@DeAnza.edu and the instructor will contact you by e-mail one week before the quarter begins. If you want to add this Special Project section for Fall ’24 you must show up in E25 on Sept. 25th at 3 pm to fill out your paperwork with the instructor. See www.deanza.edu/dmt call 408-864-8283 or email cad@deanza.edu for more information.
 M·W···· 02:30 PM-05:20 PM STAFF, M E24 LC
22784 DMT 77Y 65R Open Special Projects in CAD
DMT-077Y-65R: Projects advancing student's knowledge and experience in a selected areas of CAD. To get on wait list and request an add code please email GillelandMax@DeAnza.edu and the instructor will contact you by e-mail one week before the quarter begins. Project type and design will be determined through consultation with the instructor. This class meets face-to-face on-campus each week, please see class schedule. If you want to add this Special Project section for Fall ’24 you must show up in E25 on Sept. 25th at 3 pm to fill out your paperwork with the instructor. See www.deanza.edu/dmt call 408-864-8283 or email cad@deanza.edu for more information.
 ·T·R··· 02:30 PM-05:20 PM STAFF, M E36 LC
26642 DMT 80 55 Open Introduction to Machining and CNC Processes
DMT-080.-55: Accelerated on campus face to face class meets four days a week for six weeks beginning September 21st. This is the first of four classes available in the accelerated day program. See www.deanza.edu/dmt or call 408 864-8283 for more information.
MTWR··· 08:00 AM-09:15 AM Andrew Stoddard E25
LAB MTWR··· 09:30 AM-12:20 PM E21
26643 DMT 80 61 Open Introduction to Machining and CNC Processes
DMT-080.-61: On campus face to face class meets two days a week beginning September 22nd. See www.deanza.edu/dmt or call 408 864-8283 for more information.
 M·W···· 05:30 PM-06:45 PM Robert August E25
LAB M·W···· 07:00 PM-09:50 PM
26644 DMT 84A 55 Open Introduction to CNC Programming and Operation; Mill
DMT-084A.-55: Accelerated on campus face to face class meets four days a week for six weeks beginning November 2nd. This is the second of four classes available in the accelerated day program. See www.deanza.edu/dmt or call 408 864-8283 for more information.
MTWR··· 07:30 AM-08:55 AM Andrew Stoddard E24 LQ
LAB MTWR··· 09:30 AM-12:35 PM E22
26646 DMT 84A 61 Open Introduction to CNC Programming and Operation; Mill
DMT-084A.-61: On campus face to face class meets two days a week beginning September 22nd.See www.deanza.edu/dmt or call 408 864-8283 for more info.
 ·T·R··· 06:00 PM-07:15 PM Robert August E25
LAB ·T·R··· 07:30 PM-10:20 PM
26647 DMT 87E 61 Open CAD/CAM Programming Using Mastercam
DMT-87E-61:On campus face to face class meets two evenings a week beginning September 22nd.See www.deanza.edu/dmt or call 408 864-8283 for more information.
 M·W···· 05:30 PM-06:45 PM Daniel Nguyen E24
LAB M·W···· 07:00 PM-09:50 PM
29028 DMT 87K 61 Open CAD/CAM Based CNC Surface Contouring Programming Using Mastercam ·T·R··· 05:30 PM-06:45 PM Andrew Stoddard E24
LAB ·T·R··· 07:00 PM-09:50 PM
28686 DMT 90 62 Open Print Reading and Machine Shop Calculations
DMT-090: Fully ON-CAMPUS. This class meets on-campus each week on scheduled days and times as noted in the class listing. See www.deanza.edu/dmt call 408 864-5578 or email cad@deanza.edu for more info.
 ·T·R··· 03:15 PM-05:20 PM Mike Tatarakis E25
26652 DMT 95 01L Open Manufacturing Materials and Processes
DMT-095-01L:On campus face to face class meets one day a week beginning September 27th.See www.deanza.edu/dmt or call 408 864-8283 for more info.
 ·····S· 08:30 AM-11:20 AM Christoph Newell E25
LAB ·····S· 11:30 AM-02:20 PM
28687 DMT 96 01 Open Fundamentals of Industrial Automation
DMT-096-01: Fully ON-CAMPUS. This class meets on-campus each week on scheduled days and times as noted in the class listing. See www.deanza.edu/dmt call 408 864-5578 or email cad@deanza.edu for more info.
 M·W···· 06:00 PM-08:15 PM Kara Krone SC3103
22785 DMT 101 01 Open CAD Technology Laboratory Creo Parametric (Beginning)
DMT-101-01: Fully ON-CAMPUS. This CAD LAB meets on-campus each week on scheduled days and times as noted in the class listing.
·T·R··· 01:30 PM-04:20 PM STAFF, M E36
22786 DMT 102 01 Open CAD Technology Laboratory SolidWorks (Beginning)
DMT-102-01: Fully ON-CAMPUS. This CAD LAB meets on-campus each week on scheduled days and times as noted in the class listing.
M·W···· 01:30 PM-04:20 PM STAFF, M E36
22788 DMT 103 01 Open CAD Technology Laboratory Creo Parametric (Intermediate)
DMT-103-01: Fully ON-CAMPUS. This CAD LAB meets on-campus each week on scheduled days and times as noted in the class listing.
 M·W···· 01:30 PM-04:20 PM STAFF, M E34
23065 DMT 104 01 Open CAD Technology Laboratory SolidWorks (Intermediate)
DMT-104-01: Fully ON-CAMPUS. This CAD LAB meets on-campus each week on scheduled days and times as noted in the class listing.
 ·T·R··· 02:30 PM-05:20 PM STAFF, M E34
28079 DMT 105 01 Open CAD Technology Laboratory Creo Parametric (Advanced)
DMT-105-01: Fully ON-CAMPUS. This CAD LAB meets on-campus each week on scheduled days and times as noted in the class listing.
 M·W···· 09:00 AM-11:50 AM STAFF, M E36
28081 DMT 106 01 Open CAD Technology Laboratory SolidWorks (Advanced)
DMT-106-01: Fully ON-CAMPUS. This CAD LAB meets on-campus each week on scheduled days and times as noted in the class listing.
 ·T·R··· 09:00 AM-11:50 AM STAFF, M E36
28086 DMT 107 01 Open CAD Technology Laboratory Creo Parametric (Surfaces)
DMT-107-01: Fully ON-CAMPUS. This CAD LAB meets on-campus each week on scheduled days and times as noted in the class listing.
 M·W···· 09:00 AM-11:50 AM STAFF, M E36
28087 DMT 108 01 Open CAD Technology Laboratory SolidWorks (Surfaces)
DMT-108-01: Fully ON-CAMPUS. This CAD LAB meets on-campus each week on scheduled days and times as noted in the class listing.
 ·T·R··· 09:00 AM-11:50 AM STAFF, M E36
28088 DMT 109 01 Open CAD Technology Laboratory Creo Parametric (Sheetmetal)
DMT-109-01: Fully ON-CAMPUS. This CAD LAB meets on-campus each week on scheduled days and times as noted in the class listing.
 ·T·R··· 09:00 AM-11:50 AM STAFF, M E36
22787 DMT 110 61 Open CAD Technology Laboratory Geometric Dimensioning and Tolerancing
DMT-110-61: Fully ON-CAMPUS. This CAD LAB meets on-campus each week on scheduled days and times as noted in the class listing.
 M·W···· 02:30 PM-05:20 PM STAFF, M E34
26681 DMT 201 01 Open Manufacturing and CNC Technology Laboratory/Conventional Machining 1
DMT-201-01:On campus face to face lab meets two days a week on-campus each week on scheduled days and times as noted in the class listing. See www.deanza.edu/dmt or call 408 864-8283 for more info.
 M·W···· 02:30 PM-05:20 PM STAFF, M E24
26682 DMT 202 01 Open Manufacturing and CNC Technology Laboratory/CNC Machining 1
DMT-202-01:On campus face to face lab meets two days a week on-campus each week on scheduled days and times as noted in the class listing. See www.deanza.edu/dmt or call 408 864-8283 for more info.
 M·W···· 02:30 PM-05:20 PM STAFF, M E25
26683 DMT 205 01 Open Manufacturing and CNC Technology Laboratory/CAD CAM Programming 1
DMT-205-01: On campus face to face lab meets two days a week on-campus each week on scheduled days and times as noted in the class listing. See www.deanza.edu/dmt or call 408 864-8283 for more info.
 M·W···· 02:30 PM-05:20 PM STAFF, M E23
28688 DMT 396 01 Open Fundamentals of Industrial Automation
DMT-0396-01: Fully ON-CAMPUS. 1. This class mirrors the for-credit class of the same number (396 mirrors 96), so the course description is the same. 2. Non-credit courses are intended for students who want to gain general knowledge, learn a new skill, upgrade existing skills, or enrich their understanding of a wide range of topics. 3. Non-credit courses cannot be used to earn an associate degree nor any college transcriptable certificates. They can, however, be used to earn non-transcriptable vocational certificates. This class meets on-campus each week on scheduled days and times as noted in the class listing. See www.deanza.edu/dmt call 408 864-5578 or email cad@deanza.edu for more info.
 M·W···· 06:00 PM-08:15 PM Kara Krone SC3103
Back to Top