Page 138 - De Anza College Catalog 2018-2019

A
AUTO 94F Automotive Machining and Engine Service
6 Units
AUTO 350A Introduction to Automotive Principles 0 Units
(This is an enhanced, non-credit CTE course, which can lead to and only be applied to a non-transcriptable certi cate o ered directly from the Applied Technologies Division. Students will not be graded.)
Advisory: EWRT 211 and READ 211 (or LART 211), or ESL 272 and 273; MATH 212 or equivalent.
Four hours lecture (48 hours total per quarter).
(No limit on repeatability for 0 unit courses.)
A selective study of the automobile’s engine systems. Knowledge and skills necessary for basic repair, maintenance, and troubleshooting of today’s engine systems. May be used to ful ll the prerequisite to the Automotive Technology Program.
AUTO 350B Applied Automotive Principles 0 Units
(This is an enhanced, non-credit CTE course, which can lead to and only be applied to a non-transcriptable certi cate o ered directly from the Applied Technologies Division. Students will not be graded.)
Advisory: EWRT 211 and READ 211 (or LART 211), or ESL 272 and 273; MATH 212 or equivalent; AUTO 350A (may be taken concurrently).
One and one-half hours lecture, two and one-half hours laboratory (48 hours total per quarter).
(No limit on repeatability for 0 unit courses.)
Basic experiences in automotive repair and maintenance as related to the engine and its supporting systems.
AUTO 351A Introduction to Automotive 0 Units Principles - Chassis Systems
(This is an enhanced, non-credit CTE course, which can lead to and only be applied to a non-transcriptable certi cate o ered directly from the Applied Technologies Division. Students will not be graded.)
Advisory: EWRT 211 and READ 211 (or LART 211), or ESL 272 and 273; MATH 212 or equivalent.
Four hours lecture (48 hours total per quarter).
(No limit on repeatability for 0 unit courses.)
A selective study of the automobile’s chassis and drive line systems. Knowledge and skills necessary for basic repair, maintenance, and troubleshooting of today’s chassis and drive line systems. Can be used to ful ll the prerequisite to the Automotive Technology Program.
AUTO 351B Applications of Automotive 0 Units Principles - Chassis Systems
(This is an enhanced, non-credit CTE course, which can lead to and only be applied to a non-transcriptable certi cate o ered directly from the Applied Technologies Division. Students will not be graded.)
Advisory: EWRT 211 and READ 211 (or LART 211), or ESL 272 and 273; MATH 212 or equivalent; AUTO 351A (may be taken concurrently).
One and one-half hours lecture, two and one-half hours laboratory (48 hours total per quarter).
(No limit on repeatability for 0 unit courses.)
Basic experiences in automotive repair and maintenance as related to: suspension, steering, braking and drive line components.
AUTO 360 Automotive Electrical Systems 0 Units
(This is an enhanced, non-credit CTE course, which can lead to and only be applied to a non-transcriptable certi cate o ered directly from the Applied Technologies Division. Students will not be graded.)
Advisory: EWRT 211 and READ 211 (or LART 211), or ESL 272 and 273; MATH 212 or equivalent; AUTO 350A and AUTO 350B.
Nine hours lecture (108 hours total per quarter).
(No limit on repeatability for 0 unit courses.)
Principles of electricity, electronics, cranking and charging systems. Testing, diagnosis and repair of these systems.
AUTO 361A Automotive Brake Systems 0 Units
(This is an enhanced, non-credit CTE course, which can lead to and only be applied to a non-transcriptable certi cate o ered directly from the Applied Technologies Division. Students will not be graded.)
Advisory: EWRT 211 and READ 211 (or LART 211), or ESL 272 and 273; MATH 212 or equivalent; AUTO 351A and AUTO 351B.
Four and one-half hours lecture (54 hours total per quarter).
(No limit on repeatability for 0 unit courses.)
Operation of automotive brake systems. Repair, maintenance and troubleshooting.
AUTO 361B Electronically Controlled Brake Systems 0 Units
(This is an enhanced, non-credit CTE course, which can lead to and only be applied to a non-transcriptable certi cate o ered directly from the Applied Technologies Division. Students will not be graded.)
Advisory: EWRT 211 and READ 211 (or LART 211), or ESL 272 and 273; MATH 212 or equivalent; AUTO 361A .
Four and one-half hours lecture (54 hours total per quarter).
(No limit on repeatability for 0 unit courses.)
Computer controlled automotive brake systems, including service, maintenance, troubleshooting and repair procedures.
All courses are for unit credit and apply to a De Anza associate degree unless otherwise noted.
Prerequisite: AUTO 94C.
Advisory: EWRT 211 and READ 211 (or LART 211), or ESL 272 and 273;
MATH 212 or equivalent.
Four hours lecture, six hours laboratory (120 hours total per quarter).
Practice and skill development with emphasis on precision and productivity in rebuilding, servicing and installing engines. Research and prepare equipment operation and maintenance instructions.
AUTO 99A Automotive Electricity, Battery and 7 Units Cranking Systems
Prerequisite: Approved Automotive Technology Course Sequence Contract. Advisory: EWRT 211 and READ 211 (or LART 211), or ESL 272 and 273;
MATH 212 or equivalent.
Four hours lecture, nine hours laboratory (156 hours total per quarter). Automotive electricity including the electron theory, fundamentals of circuit construction and interpretation, principles of magnetism as applied to electric motors, relays and coils. Diagnosis, troubleshooting and servicing of automotive battery and cranking systems including system repair procedures. Developing skills in the use of test equipment including the DVOM and electrical load testing tools for the analysis and diagnosis of these types of electrical systems.
AUTO 99B Automotive Charging, Ignition and 7 Units Accessory Systems
Prerequisite: Approved Automotive Technology Course Sequence Contract. Advisory: EWRT 211 and READ 211 (or LART 211), or ESL 272 and 273; MATH 212 or equivalent.
Four hours lecture, nine hours laboratory (156 hours total per quarter).
The fundamentals of automotive electronic devices as they apply to the automotive charging and ignition systems. Emphasis on diagnosis of these systems using test instruments including the oscilloscope. Introduction to automotive accessory systems including wiring and repair techniques. Skill development in the understanding of the electrical wiring diagram networks as provided by manufacturers.
AUTO 99C
Introduction to Engine
7 Units
AUTO 99D
Intermediate Engine
7 Units
AUTO 99E
Basic Engine Performance Diagnostic
7 Units
Performance Systems
Prerequisite: AUTO 99A.
Advisory: EWRT 211 and READ 211 (or LART 211), or ESL 272 and 273;
MATH 212 or equivalent.
Four hours lecture, nine hours laboratory (156 hours total per quarter). Electronically controlled automotive systems. Fundamentals of automotive microprocessors and automotive onboard computers. Testing techniques for system input and output devices. Diagnosis, troubleshooting, and repairing the automotive fuel supply system including carburetion and feedback carburetion. Diagnosis, troubleshooting, and repair techniques for no-start conditions. Procedure development for analyzing and repairing common problems of fuel, ignition, electrical and basic engine mechanical systems which a ect engine performance of the automobile.
Performance Systems
Prerequisite: AUTO 99A.
Advisory: EWRT 211 and READ 211 (or LART 211), or ESL 272 and 273;
MATH 212 or equivalent.
Four hours lecture, nine hours laboratory (156 hours total per quarter). Electronically controlled engine performance systems. Diagnosing, troubleshooting and repairing the automotive fuel-injection systems of domestic automobiles. Testing techniques for system input and output devices using automotive scanners and oscilloscopes.
Procedures
Prerequisite: AUTO 99C.
Advisory: EWRT 211 and READ 211 (or LART 211), or ESL 272 and 273;
MATH 212 or equivalent.
Four hours lecture, nine hours laboratory (156 hours total per quarter). Automotive technician training program to include each system which aids in increasing fuel economy and in the reduction of emissions and pollutants from the automobile. Diagnosing and troubleshooting the systems controlling automotive performance and drive-ability.
AUTO 99F Intermediate Engine Performance 7 Units Diagnostic Procedures
Prerequisite: AUTO 99C.
Advisory: EWRT 211 and READ 211 (or LART 211), or ESL 272 and 273;
MATH 212 or equivalent.
Four hours lecture, nine hours laboratory (156 hours total per quarter). Performance tuning of automotive gasoline engines. Emphasis on reference material dealing with repair procedures, speci cations, and e cient tune-up procedures. Intermediate level for usage of computer scanners and oscilloscopes. Diagnosing, troubleshooting and repairing the systems designed for the control of engine temperature.
136
2O18-2O19 DE ANZA COLLEGE CATALOG